Labai pavojingi tokie visokie atnaujinimai. Gal programa neatitiko gal dar kazkas. Kaip suprantu pries tai registratorius prisijungdavo per usb. dabar kompas jo nebemato.. Turetu buti viduje kontaktai programos irasymui, bet tam jau reikalingas programatorius ir kazkokie spec failiukai kuriu taip lengvai nerasi.
PS Paziurek gal pades :
https://www.youtube.com/watch?v=CB2E0YB8564Bricked Mini 0806
If your brick your Mini 0806 camera after upgrading, you may be able to recover it using DirectUSB.
Make a cable with Pin 4/5 shorted on micro usb (or use a OTG cable with male to male usb plug)
Download the DirectUSB Software. Extract the archive you have just downloaded
Plug the Mini 0806 into the PC, it should make a sound to say new hardware plugged in, or an unknown device appears in device manager (If it doesn’t, unplug device and hold power button for 20 seconds until light goes out and plug back in). On windows 7 manually install the drivers, point to the folder you have just extracted, then go to DirectUSB/Drivers. If it doesn’t work, please re-check the cable.
Let it install, then install the C++ distribution packs for your OS.
Run Direct USB
Click connect, make sure it detects device and says init dram ok.
Select relevant firmware file under firmware, then click Upload, it should all go smoothly, this process is quite quick, as soon as it stops doing the flash it will show a full green bar and OK.
Unplug the Mini 0806, hold power till LED light goes off, then turn it on and it should boot up.
Nuorodos
Varžybos
